Simple Hacks To Fix When Blink Camera Connected But Not Working

Blink Camera Not Recording

Is your Blink Camera Connected But Not Working? We understand your issue and this is why we have come up with this troubleshooting guide. Whenever we say security camera, the name of Blink Camera comes on the top.

Just like any other technical device, sometimes the Blink security camera also starts reflecting some issues. The issue of Blink Camera Not Recording is one of those troubles. So, stop running your mind in all the direction and sit calmly for a while and read this guide.

How To Resolve When Blink Camera Connected But Not Working?

If you want to make your security camera work again, place the camera near the sync module, power recycle the router, power recycles the Blink camera, check the batteries of the camera.

Don’t worry, let’s know all the troubleshooting steps in a little detail.

  1. Place Blink Security Camera Near Sync Module

The very first thing that you can do to fix the trouble is, place the Blink security camera near the module. In short, we just want to say that the signal strength of the sync module should be strong enough.

  1. Power Recycle The Router

The very next thing methods you can apply to fix Blink Camera Not Recording is, power recycle the router. It may be possible that the issue is within the router. This is why your camera is not able to record anything.

So, disconnect the router from the power vent and turn it off for a while. Wait for a while and then reconnect the cables again. These methods may fix the issue.

  1. Power Recycle The Blink Security Camera

If the above step won’t work out in your favor then power recycles the blinking camera. To do so, you just have to remove the batteries from their back. Wait for at least 10 seconds and then reinsert the batteries again.

After doing that, check if still your Blink Camera Connected But Not Working or the issue got resolved.

  1. Connect Your Camera To Any Other Power Outlet

If you have tried all the steps and still Blink Camera Not Detecting Motion, connect the camera with any other power outlet.

There are chances that your electrical outlet has stopped working.

  1. Charge The Camera Via USB Cable

If you have tried all the steps given above and still all the results are negative, charge the camera via USB cable. Before doing that, don’t forget to remove the batteries from the camera.

We really hope that doing this will fix the issue of Blink Camera Not Recording Clips.

Security Cam Helpline

A Few More Lines…

In this guide, we have told you all the methods that are required to fix why your Blink Camera Connected But Not Working. We hope that you have followed all the methods in the same order and your camera is starting working again.

Let us tell you that you can’t blame gadgets all the time. Sometimes, it’s just us who are responsible for why gadgets stop working.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

Create your website at WordPress.com
Get started
%d bloggers like this: